Lasers

Horizontal auto-levelling rotation laser. The laser is equipped with a transportation lock that locks the pendulum when the laser is not in use. Easy-to-operate, the laser
is operated with two buttons at the top of the unit. The advantage of this is that the laser will not move out of position when you press the keys during operation. The laser includes both a receiver and remote control which facilitates the use when the laser is used for longer distances and when you are working by yourself.
Auto-levelling ± 5°. Tolerance: ± 0.2mm/m. Laser class: 2/EN 60825-1. Wavelength: 1 x 635nm. Operating range: 30m radius or 150m radius with the handheld receiver (max.). 2 speeds: 300rpm and 600rpm. Tripod thread: 5/8”.

The floor laser has 4 laser lines at 90° to each other forming a cross in front of the unit. This allows you to add tiles in four directions. The lines will also continue
behind the laser, which means that you can lay tiles in the entire space with a single measurement. The laser has adjustable feet for work on uneven surfaces, plus a 5mm spacer foot which makes it possible to lay tiles underneath the unit. Makes it easier to lay tiles.
Tolerance: ± 0.3mm/m. Laser class: 2/EN 60825-1. Wavelength: 4 x 635nm. Operating range: 10m radius per line (max.).

Small and flexible cross-line laser. Laser is auto-levelling with 2 diodes for vertical and horizontal lines. The lines can be switched separately or together to form a
cross. There is an option to mechanically lock the pendulum to tilt the laser. The laser is equipped with a transportation lock that locks the pendulum when the laser is not in use. Makes jobs such as, measuring out walls, kitchens or when painting with two different colours, simpler.
Auto-levelling ± 5°. Tolerance: ± 1.0mm/m. Laser class: 2M/EN 60825-1. Wavelength: 2 x 635nm. Operating range: 15m radius (max.). Tripod thread: 5/8”.

Simultaneously transmits five laser points. Laser is auto-levelling and rotating the top gives accurate horizontal levels whilst at the same time, the two plumb points show precise floor to ceiling vertical alignment. Makes easy work of such jobs as setting out studwork and uprights, and installing partitioning.
Auto-levelling ± 4° lateral, ± 10° front/rear. Tolerance: ± 0.4mm/m or 0.022°. Laser class: 2/EN 60825-1. Wavelength: 1 x 635nm. Operating range: 30m radius (max.)